LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> 6 s, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Selector Lever Component Inspection

Selector Lever Component Inspection

  1. Disconnect the negative battery cable.
  2. Remove the center console.
  3. Remove the dashboard completely. (See DASHBOARD REMOVAL/INSTALLATION .)
  4. Disconnect the selector lever component connector.
  5. Inspect for continuity at the selector lever component.
    Fig 1: Selector Lever Component Connector Continuity Table
    G01932704Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Selector Lever Component Connector Terminals
    G01932705Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals