Crankshaft Position Sensor Resistance
WARNING: This page is about a different car, the 1997 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect crankshaft position sensor connector. Using an ohmmeter, measure the resistance between terminals "A" and "B". See Fig 1 . Resistance should be as specified. Refer to specifications in the CRANKSHAFT POSITION SENSOR RESISTANCE table. If resistance is not as specified, replace crankshaft position sensor.
CRANKSHAFT POSITION SENSOR RESISTANCE
| Application | Ohms@ 68°F (20°C) |
|---|---|
| Miata | 500-600 |