Installation [09/2014 - ]: Procedure

1. Apply a light coat of engine oil to the O-ring of the PCV valve.
2. Using a 22 mm socket wrench, install the PCV valve to the No. 2 separator case.

   Torque: 5.0 N.m (51 kgf*cm, 44 in.*lbf) 

   NOTE:

   When reusing the PCV valve, inspect the O-ring.

   If the O-ring has scratches or cuts, replace the PCV valve.

3. Connect the PCV valve hose.

1. Install the engine cover with the 2 clips.

1. Connect the engine wire with the 2 clamps and nut.

   Torque: 10 N.m (102 kgf*cm, 7 ft.*lbf) 

Refer to PROCEDURE - Step 116 Refer to PROCEDURE - Step 115