LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Cruise Control) >> Driving Support Ecu >> Removal

Driving Support Ecu: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL ).
  2. REMOVE COWL SIDE TRIM BOARD LH  (See REMOVAL ).
  3. REMOVE DASH PANEL EXTENSION LH 
    1. Detach the clamp
    2. Disconnect the connector.
    3. Remove the 2 nuts, bolt and dash panel extension.
    Fig 1: Locating Dash Panel Extension Nuts And Bolts With Clamp
    G05776078Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE DRIVING SUPPORT ECU 
    1. Remove the nut and ECU.
    NOTE:
    • Do not drop the ECU or subject it to strong shocks.
    • During the removal and installation, do not remove the drip-proof cover.
    Fig 2: Locating Driving Support ECU Nut
    G05776079Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals