LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LX 570 >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control >> Suspension Control Cylinder >> Removal

Suspension Control Cylinder: Removal

  1. REMOVE TAILPIPE ASSEMBLY  (See REMOVAL )
  2. REMOVE CENTER EXHAUST PIPE ASSEMBLY  (See REMOVAL )
  3. REMOVE HEIGHT CONTROL UNIT INSULATOR  (See REMOVAL )
  4. DISCHARGE SUSPENSION FLUID PRESSURE  (See REMOVAL )
  5. REMOVE NO. 7 HEIGHT CONTROL TUBE  (See INSTALLATION )
  6. REMOVE SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY  (See INSTALLATION )
  7. REMOVE CLAMP  (See REMOVAL )
  8. REMOVE NO. 6 HEIGHT CONTROL TUBE  (See REMOVAL )
  9. REMOVE NO. 6 HEIGHT CONTROL TUBE LH  (See REMOVAL )
  10. REMOVE NO. 5 HEIGHT CONTROL TUBE LH  (See REMOVAL )
  11. REMOVE NO. 5 HEIGHT CONTROL TUBE  (See REMOVAL )
  12. DISCONNECT REAR NO. 4 HEIGHT CONTROL TUBE  (See REMOVAL )
  13. REMOVE NO. 1 HEIGHT CONTROL VALVE ASSEMBLY  (See REMOVAL )
  14. DISCONNECT NO. 3 HEIGHT CONTROL TUBE 
    1. Remove the union bolt and gasket, then disconnect the No. 3 height control tube from the control cylinder.
    Fig 1: Locating No. 3 Height Control Tube Union Bolt
    G05761412Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. DISCONNECT NO. 4 HEIGHT CONTROL TUBE LH 
    1. Remove the union bolt and gasket, then disconnect the No. 4 height control tube from the control cylinder.
    Fig 2: Locating No. 4 Height Control Tube Bolt (LH)
    G05761413Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. DISCONNECT NO. 4 HEIGHT CONTROL TUBE 
    1. Remove the union bolt and gasket, then disconnect the No. 4 height control tube from the control cylinder.
    Fig 3: Locating No. 4 Height Control Tube Union Bolt
    G05761412Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. DISCONNECT NO. 3 HEIGHT CONTROL TUBE LH 
    1. Remove the union bolt and gasket, then disconnect the No. 3 height control tube from the control cylinder.
    Fig 4: Locating No. 3 Height Control Tube Union Bolt
    G05761415Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. REMOVE HEIGHT CONTROL BRACKET WITH CYLINDER ASSEMBLY 
    1. Remove the 2 bolts and bracket with cylinder.
    Fig 5: Locating Height Control Bracket With Cylinder Bolts
    G05761416Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. REMOVE CENTER SUSPENSION CONTROL CYLINDER SUB-ASSEMBLY 
    1. Remove the 2 nuts and cylinder from the bracket.
    Fig 6: Locating Center Suspension Control Cylinder Nuts
    G05761417Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals