LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Brake Control) >> Skid Control Buzzer >> Removal

Skid Control Buzzer: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION 
  2. REMOVE SHIFT LEVER KNOB  (See REMOVAL )
  3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY WITH FRONT ASH RECEPTACLE  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH END PANEL LH  (See REMOVAL )
  5. REMOVE INSTRUMENT PANEL FINISH END PANEL RH  (See REMOVAL )
  6. REMOVE CONSOLE POCKET  (See REMOVAL )
  7. REMOVE CONSOLE BOX CARPET  (See REMOVAL )
  8. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE REAR CONSOLE BOX ASSEMBLY  (See REMOVAL )
  10. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  11. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)  (See REMOVAL )
  12. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)  (See REMOVAL )
  13. REMOVE SKID CONTROL BUZZER 
    1. Disconnect the skid control buzzer connector.
    2. Remove the clip and skid control buzzer assembly.
      Fig 1: Locating Skid Control Buzzer Connector With Clip
      G05250511Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals