Outer Mirror Control Ecu: Installation

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY
1. Install the outer mirror control ECU assembly with the nut.
2. Connect the 2 connectors.
INSTALL LOWER INSTRUMENT PANEL RH ( INSTALLATION )
INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY ( INSTALLATION )
INSTALL SIDE INSTRUMENT PANEL RH ( INSTALLATION )
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY ( INSTALLATION )
INSTALL FRONT DOOR OPENING TRIM COVER RH ( INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE RH ( INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END RH ( INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal ( INITIALIZATION ).
INSPECT SRS WARNING LIGHT
( DIAGNOSIS SYSTEM )