LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> Turn Signal Flasher Assembly >> Removal

Turn Signal Flasher Assembly: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  3. REMOVE SIDE INSTRUMENT PANEL LH  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE NO. 1 SWITCH HOLE BASE  (See REMOVAL )
  7. REMOVE TURN SIGNAL FLASHER ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the clamp and the turn signal flasher assembly.
      Fig 1: Locating Turn Signal Flasher Assembly Clamp
      G05252554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals