Cooling System (Mechanical): Cooling: Radiator: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE ENGINE UNDER COVER
DRAIN ENGINE COOLANT (See COOLANT )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE RADIATOR RESERVE TANK ASSEMBLY (See REMOVAL )
REMOVE V-BANK COVER (See REMOVAL )
REMOVE INTAKE AIR CONNECTOR PIPE (See REMOVAL )
REMOVE AIR CLEANER ASSEMBLY (See REMOVAL )
DISCONNECT NO. 1 RADIATOR HOSE
1. Disconnect the radiator hose.
  
  Fig 1: Locating Radiator Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DISCONNECT NO. 2 RADIATOR HOSE
1. Disconnect the radiator hose.
  
  Fig 2: Locating Radiator Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DISCONNECT NO. 1 OIL COOLER INLET TUBE
1. Disconnect the inlet tube from the radiator.
  
  Fig 3: Locating Inlet Tube And Radiator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DISCONNECT NO. 1 OIL COOLER OUTLET TUBE
1. Disconnect the outlet tube from the radiator.
  
  Fig 4: Identifying Outlet Tube And Radiator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RADIATOR ASSEMBLY
1. Remove the outlet duct.
2. Disconnect the cooling fan ECU connector.
  
  Fig 5: Identifying Outlet Duct
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 nuts and 2 radiator support brackets.
4. Remove the radiator.
5. Remove the 2 grommets.
REMOVE FAN SHROUD SUB-ASSEMBLY (See REMOVAL )

Fig 6: Identifying Radiator Support Brackets, Nuts And Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002