Cooling System (Mechanical): Cooling: Fan: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE ENGINE UNDER COVER
DRAIN ENGINE COOLANT (See COOLANT )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE RADIATOR RESERVE TANK ASSEMBLY
1. Squeeze the clip and remove the reserve tank inlet hose from the radiator assembly.
2. Remove the 2 bolts and reserve tank.
REMOVE INTAKE AIR CONNECTOR PIPE (See REMOVAL )
REMOVE AIR CLEANER ASSEMBLY (See REMOVAL )
DISCONNECT NO. 1 RADIATOR HOSE (See REMOVAL )
REMOVE ENGINE ROOM ECU OUTLET DUCT
1. Remove the outlet duct.
  
  Fig 1: Identifying Outlet Duct
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FAN SHROUD SUB-ASSEMBLY
1. Disconnect the 3 clamps and wire harness from the fan shroud.
2. Disconnect the 2 connectors.
  
  Fig 2: Locating Clamps And Wire Harness From Fan Shroud
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 6 bolts and fan shroud.
  
  Fig 3: Locating Fan Shroud And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COOLING FAN ECU
1. Disconnect the 2 connectors.
2. Remove the 2 screws and ECU.
  
  Fig 4: Locating Cooling Fan ECU And Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FAN
1. Remove the 2 nuts and fan.
REMOVE COOLING FAN MOTOR
1. Disconnect the 2 wires from the fan shroud.
  
  Fig 5: Locating Fan Shroud With Wires
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 3 screws and fan motor.
REMOVE NO. 2 COOLING FAN MOTOR
1. Remove the 3 screws and fan motor.
  
  Fig 6: Locating Cooling Fan Motor Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002