Headlight Assembly: Installation

HINT:

• The procedures listed below are for the LH side.
• Use the same procedures for the RH and LH side.

1. INSTALL HEADLIGHT ASSEMBLY 
   1. Connect the connector.
   2. Install the unit with the 2 bolts, nut and clip.
      Fig 1: Identifying Headlight Assembly Bolts And Clip

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL FRONT BUMPER ENERGY ABSORBER 
3. INSTALL FRONT BUMPER COVER (See  INSTALLATION  ) 
4. INSTALL FRONT FENDER LINER LH (See  INSTALLATION  ) 
5. INSTALL FRONT FENDER LINER RH (See  INSTALLATION  ) 
6. INSTALL RADIATOR GRILLE (See  INSTALLATION  ) 
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
8. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
9. ADJUST HEADLIGHT AIMING (See  ADJUSTMENT   )