Instrument Panel Safety Pad: Reassembly

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

Fig 1: Identifying Claws And Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR 
   1. Attach the 2 claws to install the sensor.
      Fig 2: Identifying Claws And Sensor

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH 
   1. Attach the 6 claws to install the garnish.
      Fig 3: Identifying Claws And Garnish

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL NO. 2 DEFROSTER NOZZLE GARNISH 
   1. Attach the 6 claws to install the garnish.
      Fig 4: Identifying Claws And Garnish

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. INSTALL NO. 1 METER HOOD RETAINER 
   1. Attach the 2 screws to install the 2 retainers.
      Fig 5: Identifying Screws And Retainers

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. INSTALL NO. 2 INSTRUMENT PANEL WIRE 
   1. Attach the 4 clamps to install the wire.
   2. Connect the connector.
6. INSTALL NAVIGATION ANTENNA ASSEMBLY (for DVD)  (See INSTALLATION )
7. INSTALL NAVIGATION ANTENNA ASSEMBLY (for HDD)  (See INSTALLATION )
   Fig 6: Identifying Connector And Clamps

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
8. INSTALL TIRE PRESSURE WARNING ECU 
   1. Install the ECU with the bolt.
      Fig 7: Identifying Bolt And ECU

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
9. INSTALL NO. 2 HEATER TO REGISTER DUCT 
   1. Install the duct with the 2 screws.
10. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY  (See INSTALLATION )
    Fig 8: Identifying Screws And Duct

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
11. INSTALL NO. 3 HEATER TO REGISTER DUCT 
    1. Install the duct with the 3 screws.
       Fig 9: Identifying Screws And Duct

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
12. INSTALL NO. 1 HEATER TO REGISTER DUCT 
    1. Install the duct with the 3 screws.
       Fig 10: Identifying Screws And Duct

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
13. INSTALL NO. 1 INSTRUMENT PANEL PIN 
    1. Install the 2 pins with the 2 screws.
       Fig 11: Identifying Screws And Pins

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
14. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT 
    1. Attach the claw and install the duct.
    2. Install the screw.
       Fig 12: Identifying Claw And Duct

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
15. INSTALL DEFROSTER NOZZLE ASSEMBLY 
    1. Install the nozzle with the 3 screws.
       Fig 13: Identifying Nozzle And Screws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
16. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT 
    1. Attach the claw and install the duct.
    2. Install the screw.
       Fig 14: Identifying Claw And Duct

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
17. INSTALL ENGINE SWITCH 
    1. Attach the 2 claws to install the switch.