Navigation Antenna: Installation
- INSTALL NAVIGATION ANTENNA ASSEMBLY (for HDD)
- Attach the 2 clamps.
- Install the antenna with the 2 screws.
- INSTALL NAVIGATION ANTENNA ASSEMBLY (for DVD)
- Attach the 4 clamps.
- Install the antenna with the 2 screws.
- INSTALL NO. 3 HEATER TO REGISTER DUCT (See REASSEMBLY )
- INSTALL DEFROSTER NOZZLE ASSEMBLY (See REASSEMBLY )
- INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT (See REASSEMBLY )
- INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
- Install the instrument panel safety pad (see INSTALLATION ).
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )
- INSPECT STEERING PAD (See INSTALLATION )
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see
INITIALIZATION
).
- CHECK SRS WARNING LIGHT
- Check the SRS warning light (see DIAGNOSIS SYSTEM ).