Rocker Panel Moulding: Removal

HINT:

Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.

REMOVE FRONT FENDER WHEEL OPENING MOULDING LH (See REMOVAL )
REMOVE QUARTER PANEL WHEEL OPENING MOULDING LH (See REMOVAL )
REMOVE NO. 6 ROCKER PANEL MOULDING PROTECTOR
1. Using a clip remover, remove the 2 clips.
2. Remove the screw and protector.
REMOVE FRONT DOOR NO. 3 WEATHERSTRIP LH
1. Fully open the front door and rear door.
2. for Standard Body:
  Detach the 12 clips and remove the weatherstrip.
  
  Fig 2: Identifying Weatherstrip Clips (For Standard Body)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. for Long Body:
  Detach the 13 clips and remove the weatherstrip.
  
  Fig 3: Identifying Weatherstrip Clips (For Long Body)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ROCKER PANEL MOULDING LH
1. Remove the screw on the front side.
  
  Fig 4: Identifying Front Side Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the screw on the rear side.
  
  Fig 5: Identifying Rear Side Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. for Standard Body:
  Using a clip remover, remove the 7 clips.
  
  Fig 6: Identifying Rocker Panel Moulding Clip (For Standard Body)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. for Long Body:
  Using a clip remover, remove the 8 clips.
  
  Fig 7: Identifying Rocker Panel Moulding Clips (For Long Body)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the 2 screws.
  
  Fig 8: Identifying Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. for Standard Body:
  Detach the 10 clips and remove the rocker panel moulding.
  
  Fig 9: Identifying Rocker Panel Moulding Clips (Standard Body)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. for Long Body:
  Detach the 11 clips and remove the rocker panel moulding.
  
  Fig 10: Identifying Rocker Panel Moulding Clips (For Long Body)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002