Wheel Opening Moulding: Removal

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. REMOVE FRONT FENDER WHEEL OPENING MOULDING LH 
   1. Remove the 5 screws.
   2. Detach the clip and remove the moulding.
      Fig 1: Identifying Front Fender Wheel Opening Moulding

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. REMOVE QUARTER PANEL WHEEL OPENING MOULDING LH 
   1. Remove the 4 screws and moulding.
   Fig 2: Identifying Quarter Panel Wheel Opening Moulding LH
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002