LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting >> Glove Box Light >> Installation

Glove Box Light: Installation

  1. INSTALL GLOVE BOX LIGHT ASSEMBLY 
    1. Install the glove box light assembly as shown in the illustration.
      Fig 1: Installing Glove Box Light Assembly
      G05252482Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LOWER INSTRUMENT PANEL RH  (See INSTALLATION )
  3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  4. INSTALL SIDE INSTRUMENT PANEL RH  (See INSTALLATION )
  5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  6. INSTALL FRONT DOOR OPENING TRIM COVER RH  (See INSTALLATION )
  7. INSTALL FRONT DOOR SCUFF PLATE RH  (See INSTALLATION )
  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  (See INSTALLATION )
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  10. INSPECT SRS WARNING LIGHT 

    (See DIAGNOSIS SYSTEM )

  11. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
scientia non olet · About LEMON Manuals