Camshaft Timing Oil Control Valve Assembly: Installation

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Exhaust Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 1: Locating Camshaft Timing Oil Control Valve O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
3. Connect the camshaft timing oil control valve connector.
  
  Fig 2: Locating Bolt On Camshaft Timing Oil Control Valve Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Intake Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 3: Locating Camshaft Timing Oil Control Valve O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Connect the camshaft timing oil control valve connector.
  
  Fig 4: Locating Camshaft Timing Oil Control Valve Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1 Exhaust Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 5: Locating Camshaft Timing Oil Control Valve O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
3. Connect the camshaft timing oil control valve connector.
  
  Fig 6: Locating Bolt On Camshaft Timing Oil Control Valve Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1 Intake Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 7: Locating Camshaft Timing Oil Control Valve O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
3. Connect the camshaft timing oil control valve connector.
INSTALL INTAKE AIR SURGE TANK ASSEMBLY (See INSTALLATION )
INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See INSTALLATION )
INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See INSTALLATION )
INSTALL NO. 1 AIR CLEANER INLET (See INSTALLATION )
INSTALL NO. 2 AIR CLEANER INLET (See INSTALLATION )
ADD ENGINE COOLANT (See ON-VEHICLE INSPECTION )
INSPECT FOR COOLANT LEAK (See ON-VEHICLE INSPECTION )
INSPECT FOR OIL LEAK (See REPLACEMENT )
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL COWL TOP OUTER PANEL SUB-ASSEMBLY
1. Remove the 6 set nuts of the shock absorber.
2. Install the cowl top panel outer with the 4 bolts and 2 nuts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
3. Install the shock absorber with the 4 set nuts.
  Torque: 80 N*m (815 kgf*cm, 59 ft.*lbf)
4. Install the 2 front shock absorber caps with the 6 nuts, (with Air Suspension)
  Torque: 80 N*m (815 kgf*cm, 59 ft.*lbf)
5. Install the grommet.
6. Install the 2 wire harness clamps.
7. Connect the rain sensor connector, (with Auto Wiper)
  
  Fig 9: Locating Cowl Top Panel Outer Sub-Assembly Bolts And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WINDSHIELD WIPER LINK ASSEMBLY
HINT:

(See INSTALLATION )