Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Purpose of the Diagnostic Trouble Code(s)
- Cylinder injector circuit low, signal stuck low
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control module cavity
- Circuit reference O_P_PVL11
- Circuit reference O_P_PVH11
- Monitor Description
- Signal value below threshold
- Prioritized List of Possible Causes
- The powertrain control module measures a signal that remains low when transitions are expected
- Driver output voltage of fuel injector below threshold
- Fuel injector circuit short circuit to ground, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Fuel injector failure