Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control module cavity
- Circuit reference I_T_VTG
- The powertrain control module is unable to command a motor, solenoid or relay, to move a piece of equipment to the commanded position either due to a failure in the actuator or its mechanical environment
- Variable geometry turbine vane actuator circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Variable geometry turbine vane actuator failure