Possible Causes
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This diagnostic checks idle speed against target idle speed and if greater than 100rpm over target idle speed then DTC is set
- The engine control module measures a signal that remains low when transitions are expected
- Intake air system leakage
- Intake air system components incorrectly installed, loose or damaged pipework
- Engine crankcase breather system leakage
- Engine crankcase breather system components incorrectly installed