DTC P0106-24: Manifold Absolute Pressure/BARO Sensor Range/Performance - Signal stuck high: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Check the inlet manifold for air leakage. Repair as required, clear DTC and retest
- Refer to the appropriate system wiring diagrams and check the manifold absolute pressure sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance