LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Optima EX >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 6) (HEV) >> DTC P0401-00: Exhaust Gas Recirculation Flow Insufficient Detected >> Wiring Inspection >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect Battery (-) terminal.
  3. Refer to EGR VALVE REMOVAL and ENGINE CONTROL SYSTEM (HEV) and disconnect EGR Valve and ECM/PCM connector.
  4. Measure resistance between Pin No. 4 (Signal) terminal of EGR Valve harness connector and Pin No. 15 (Signal) terminal of ECM/PCM harness connector.

    Specification:  Approx. below 1Ω

  5. Is measured value within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals