Drive Test Part 1

1. Drive the vehicle for approximately 10 minutes until the engine oil and ATF reach the proper temperature.
   • Appropriate ATF temperature : 70 ~ 80° C(158~176°F)
2. Park the vehicle on the level surface.
3. Move to P Range.
4. Engage the engine.
5. Move to D Range.
6. Depress the accelerator pedal halfway to accelerate the vehicle.

If using hi-scan, read gear position.

Does it start from D1?

Yes 

No Check mark "Does not start from D1" on the diagnosis sheet and continue the road test.

Depress the accelerator pedal about halfway and check if shift up (D1-->D2) in a proper speed.

Refer to SHIFT PATTERN .

If using hi-scan, read gear position, throttle opening angle, and vehicle speed.

Does shift up D1-->D2 in a proper speed?

Yes 

No Check mark "No D1-->D2 shift or No D4-->D2 quick down" on the diagnosis sheet and continue the road test.

Depress the accelerator pedal about halfway and check if shift up (D2-->D3) in a proper speed.

Refer to SHIFT PATTERN .

If using hi-scan, read gear position, throttle opening angle, and vehicle speed.

Does shift up D2-->D3 in a proper speed?

Yes 

No Check mark "No D2-->D3 shift" on the diagnosis sheet and continue the road test.

Depress the accelerator pedal about halfway and check if shift up (D3-->D4) in a proper speed.

Refer to SHIFT PATTERN .

If using hi-scan, read gear position, throttle opening angle, and vehicle speed.

Does shift up D3-->D4 in a proper speed?

Yes 

No Check mark "No D3-->D4 shift" on the diagnosis sheet and continue the road test.

Depress the accelerator pedal about halfway and check if shift up (D4-->D5) in a proper speed.

Refer to SHIFT PATTERN .

If using hi-scan, read gear position, throttle opening angle, and vehicle speed.

Does shift up D4-->D5 in a proper speed?

Yes 

No Check mark "No D4-->D5 shift" on the diagnosis sheet and continue the road test.

Depress the accelerator pedal about halfway and check if shift up (D5-->D5 L/U) in a proper speed.

Refer to SHIFT PATTERN .

If using hi-scan, refer to "LU SOL 0.00A" as "Select Major Item".

Does it lock-up?

Yes 

No Check mark "No D5-->D5 L/U shift" on the diagnosis sheet and continue the road test.

Does it maintain lock-up status?

Yes 

No Check mark "Does not maintain lockup status" on the diagnosis sheet and continue the road test.

Release the accelerator pedal.

Does lock-up release when releasing the accelerator pedal?

Yes 

No Check mark "Lock-up does not release" on the diagnosis sheet and continue the road test.

Decelerate while depressing the brake pedal lightly. If using hi-scan, read gear position and engine speed.

When shifting down from D5 to D4, does the engine speed drop smoothly to idle?

Yes 

No Check mark "The engine speed does not drop to idle" on the diagnosis sheet and continue the road test.

1. Stop the vehicle.
2. Go to DRIVE TEST PART 2 .