LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 720 (5.7L Engine (Service Information)) >> Engine Block >> Damper, Vibration >> Removal

Damper, Vibration: Removal

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL, 5.7L/6.4L ELECTRONIC POWER STEERING .
  3. Remove the cooling fan. Refer to FAN, COOLING, REMOVAL, 5.7/6.4L SINGLE FAN .
    GC0158227Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Install a piece of cardboard (1) or equivalent to the radiator face to protect the radiator during the repair procedure.

  4. Remove the crankshaft damper bolt.
  5. Install an appropriate flange puller (2) and remove the damper (3).
scientia non olet · About LEMON Manuals