LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Compass Base, 2.0 A, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 ((Transmission Control Module (TCM) Electrical Diagnostics - CVT Automatic Transmission) - MK) >> DTC Troubleshooting >> P0722 - Output Speed Sensor Circuit No Signal >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Condition one:  Output speed RPM is less than 150 RPM with a Input speed RPM greater than 1000 RPM for the period of 5 seconds.

Condition two:  Vehicle speed is greater than 20 Km/h (12.5 mph) calculated by the last secondary speed with the current Output Speed value equals to 0 RPM for the period of 500 msec.

Condition three:  Both the Input and Output Speed sensors are less than 150 RPM with a actual vehicle speed greater than 10 Km/h. (Note: this is an indication of either the power supply to both sensors is open or the C106 connector is disconnected.)

scientia non olet · About LEMON Manuals