LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Compass Base, 2.0 A, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 ((Transmission Control Module (TCM) Electrical Diagnostics - 6F24 Automatic Transmission) - MK) >> DTC Troubleshooting >> P0716-00 - Input Shaft Speed Sensor 1 Performance >> When Monitored

When Monitored

WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Battery supply voltage is greater than or equal to 9 volts.

Driving Conditions for stuck failure: 

No input speed sensor errors.

No CAN related errors.

No engine RPM signal errors.

No output speed related errors.

No Transmission Range Switch (TRS) errors.

Input speed is equal to 0 RPM.

Engine speed is greater than or 650 RPM.

Time since gear shift is greater than or equal to 1 second.

Shift lever position is in park/neutral or shift lever position is in drive and the output speed sensor signal is greater than or equal to 100 RPM.