LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Compass Base, 2.0 A, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Electronic Control Modules (Service Information) - MK) >> Module, All Wheel Drive Control (AWDCM) >> Installation

Module, All Wheel Drive Control (AWDCM): Installation

WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
GC0098485Courtesy of CHRYSLER GROUP, LLC
  1. Position the All-Wheel Drive Module (1) onto the studs.
  2. Install and securely tighten the All-Wheel Drive Module nuts (2).
  3. Connect the All-Wheel Drive Module wire harness connector (3).
  4. Install the Transmission Control Module (TCM). Refer to MODULE, TRANSMISSION CONTROL (TCM), INSTALLATION .
  5. Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .
scientia non olet · About LEMON Manuals