Module, Transmission Control (TCM): Installation
WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Install the TCM mounting bracket holes (1) over the two studs on the bulkhead.
- Install the two nuts (4) to mounting studs (1) on the bulkhead.
- Position the body harness aside to gain access to the mounting studs.
- Tighten nuts (4) to 15 N.m (133 in. lbs.).
- Plug in electrical connectors (2) to TCM (3).
- If a new TCM is installed a learn procedure must be performed.