Gearshift Cable

Fig 1: Removing/Installing Shift Cable & Bracket

Courtesy of CHRYSLER LLC

1 - TRANSMISSION

2 - MANUAL LEVER

3 - SHIFT CABLE

4 - SHIFT CABLE BRACKET

5 - BOLT

Disengage the gearshift cable (3) eyelet at transmission manual shift lever (2) and pull cable out of the mounting bracket (4). See Fig 1.

Fig 2: Gearshift and Park Lock Cable at Shifter Assembly

Courtesy of CHRYSLER LLC

1 - SHIFTER ASSEMBLY

2 - ADJUSTMENT NUT

3 - SHIFT CABLE

4 - SHIFT CABLE ATTACHMENT

5 - PARK LOCK CABLE

Lower the vehicle.
Remove the floor console as necessary to access the shift mechanism and cables. Refer to REMOVAL .
If necessary, remove the bolts holding the shield, covering the gearshift and park lock cables, to the shifter assembly and remove the shield.
Remove the gearshift cable (3) from the shift lever pin. See Fig 2.
Remove the gearshift cable retainer (4) from the notch in the shifter assembly.
From under the hood, remove the shift cable grommet from the dash panel.
Remove gearshift cable from vehicle.