LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2000 >> Cherokee Limited, 4D Utility, RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - TEVES Mark 20 >> Bleeding Brake System >> Abs Bleeding

Abs Bleeding

NOTE: Diagnostic Readout Box (DRB-III) is necessary to properly bleed Teves Mark 20 anti-lock brake system.
  1. Ensure all hydraulic brake system components are properly installed and all connections are tight. Using scan tool, check Controller Anti-Lock Brake (CAB) for Diagnostic Trouble Codes (DTC). If any DTCs are stored, clear DTCs.
  2. Bleed base brake system. See MANUAL BLEEDING  or PRESSURE BLEEDING  . After bleeding base brake system, using scan tool, select ANTI-LOCK BRAKES followed by MISCELLANEOUS, then ABS BRAKES.
  3. On all models, follow scan tool screen prompts. When scan tool displays TEST COMPLETE, disconnect scan tool. Bleed base brake system again. Top off brake fluid reservoir and verify proper brake operation before moving vehicle.
scientia non olet · About LEMON Manuals