Manual Bleeding
- Fill master cylinder. Install clear vinyl bleed hose onto right rear bleed valve. Place other end of hose in clean transparent container.
- Partially fill container with clean brake fluid. Submerge end of hose in fluid. Depress pedal and hold. Open bleed valve to release air.
- Close bleed valve. Release pedal. Repeat procedure until flow of brake fluid is clear and free of air bubbles. Fill master cylinder reservoir with brake fluid. Proceed to next bleed valve of brake bleeding sequence. See BLEEDING SEQUENCE table.
BLEEDING SEQUENCE
| Application | Sequence |
|---|---|
| Cherokee | RR, LR, RF, LF |