Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Purpose of the DTC
- To monitor diesel exhaust fluid line heater
- Electrical Cause
- Yes
- Mechanical Cause
- No
- Control Module Signal Name
- Not applicable
- Monitor Description
- Diesel exhaust fluid line heater current too low
- Prioritised List of Possible Causes
- The powertrain control module has measured current flow below a specified range
- Diesel exhaust fluid line heater circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Diesel exhaust fluid line heater failure