Possible Causes
NOTE:
- Monitor description . Detects when secondary fuelling adaptation offset is too large to maintain emissions within limits.
- This DTC is set when the value of the signal measured by the powertrain control module is not plausible given the operating conditions.
- Exhaust system leakage
- Mid catalyst heated oxygen sensor incorrectly installed
- Post catalyst heated oxygen sensor incorrectly installed
- Pre catalyst heated oxygen sensor circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Post catalyst heated oxygen sensor circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Pre catalyst heated oxygen sensor contamination or failure
- Post catalyst heated oxygen sensor contamination or failure