Inspection and Verification
- Verify the customer concern.
- Visually inspect for obvious signs of damage and system integrity.Visual Inspection
Mechanical Electrical - Check for correct gear selector lever cable adjustment. See Selector Lever Cable Adjustment .
- Visibly damaged or worn components
- Loose or missing fasteners
- Fuse(s)
- Loose or corroded electrical connector(s)
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the cause is not visually evident, verify the symptom and refer to the manufacturer approved diagnostic system, or pinpoint tests below.