LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Rodeo 3.2 W, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - Component Removal & Installation) >> Computerized Engine Control >> Throttle Actuator Control Module (Ascender 5.3L) >> Removal

Throttle Actuator Control Module (Ascender 5.3L): Removal

WARNING: This page is about a different car, the 2003 Isuzu Rodeo Sport, 2003 Isuzu Rodeo, 2003 Isuzu Axiom, and 2003 Isuzu Ascender. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove bulk connector from bracket, insert a small flat-bladed tool to disengage the clip.
  2. Disconnect Instrument Panel (I/P) electrical connector. See Figure .
  3. Disconnect engine electrical connector. See Figure .
  4. Release the retaining tab on the side of the Throttle Actuator Control (TAC) module (3). See Figure .
  5. Remove the TAC module (3) from the retaining bracket (1).
  6. If necessary, remove the TAC module bracket nuts (2) and bracket (1).
scientia non olet · About LEMON Manuals