Throttle Actuator Control Module (Ascender 5.3L): Installation

WARNING: This page is about a different car, the 2003 Isuzu Rodeo Sport, 2003 Isuzu Rodeo, 2003 Isuzu Axiom, and 2003 Isuzu Ascender. However, it is still accessible from the selected car via links, so may be relevant.

If necessary, install the TAC module bracket (1) and nuts (2). Tighten the nuts to specification. See TORQUE SPECIFICATIONS . See Fig 3 .
Install TAC module (3) to retaining bracket (1).
Snap TAC module (3) into retaining tab.
Connect engine electrical connector. See Fig 2 .
Connect I/P electrical connector. See Fig 1 .
Install bulk connector to bracket.

Fig 1: Locating Instrument Panel Electrical Connector (Ascender 5.3L)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Connecting & Disconnecting Electrical Connector At Throttle Actuator Control Module (Ascender 5.3L)

Courtesy of GENERAL MOTORS CORP.

Fig 3: Removing & Installing Throttle Actuator Control Module (Ascender 5.3L)

Courtesy of GENERAL MOTORS CORP.