Specifications Index
RODEO SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | 21 Ft. Lbs. (29 N.m) | ||
| Battery | |||
| 2.6L | CAPACITIES | ||
| 3.2L | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | |||
| With ABS | BLEEDING BRAKE SYSTEM | ||
| Without ABS | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | |||
| Service Specifications | FRONT DISC BRAKE SPECIFICATIONS | ||
| REAR DISC BRAKE SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | ||
| Drum Brakes | |||
| Service Specifications | REAR DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | Refer to GENERATOR SPECIFICATIONS table under CHARGING SYSTEM TEST . | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | DRIVE BELT ADJUSTMENT | ||
| Drive Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | |||
| 2.6L | 13.5-17.8 psi | ||
| 3.2L | 12.8-17.0 psi | ||
| Thermostat R & I | |||
| 2.6L | THERMOSTAT | ||
| 3.2L | THERMOSTAT | ||
| Water Pump R & I | |||
| 2.6L | WATER PUMP | ||
| 3.2L | WATER PUMP | ||
| Engine Mechanical | |||
| 2.6L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure |
Normal oil pressure is 57-80 psi (4.0-5.6 kg/cm2 ) at 3000 RPM. |
||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 3.2L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | With engine at normal operating temperature, ensure oil pressure is 57-80 psi (3.9-5.6 kg/cm2 ) at 3000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | 40 Ft. Lbs. (55 N.m) | ||
| Fuel System | |||
| 2.6L | |||
| Pressure Specification | FUEL PUMP | ||
| Fuel Pressure Test Procedure | FUEL PUMP PRESSURE TEST | ||
| Fuel Filter Location | INLINE FUEL FILTER REPLACEMENT | ||
| Fuel Filter R & I | INLINE FUEL FILTER REPLACEMENT | ||
| 3.2L | |||
| Pressure Specification | FUEL PUMP | ||
| Fuel Pressure Test Procedure | FUEL PUMP PRESSURE TEST | ||
| Fuel Filter Location | FUEL FILTER | ||
| Fuel Filter R & I | FUEL FILTER | ||
| Ignition | |||
| 2.6L | |||
| Firing Order & Cylinder Identification | FIRING ORDER & TIMING MARKS | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | FIRING ORDER & TIMING MARKS | ||
| 3.2L | |||
| Firing Order & Cylinder Identification | FIRING ORDER & TIMING MARKS | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | FIRING ORDER & TIMING MARKS | ||
| Spark Plug | |||
| 2.6L | SPARK PLUGS | ||
| 3.2L | SPARK PLUGS | ||
| Starting | |||
| Starter | |||
| 2.6L | STARTER SPECIFICATIONS | ||
| 3.2L | STARTER SPECIFICATIONS | ||
| Torque | |||
| 2.6L | TORQUE SPECIFICATIONS | ||
| 3.2L | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | |||
| Aluminum Wheel | 87 Ft. Lbs. (118 N.m) | ||
| Steel Wheel | 66 Ft. Lbs. (90 N.m) | ||