Work Procedure
WARNING: This page is about a different car, the 2020 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification.
NOTE: If "Before Replace ECU" of "Read / Write Configuration" can not be used, use the "Manual Configuration" after replacing display control unit.GO TO 2.
- REPLACE DISPLAY CONTROL UNIT
Replace display control unit. Refer to DISPLAY CONTROL UNIT : Removal & Installation .
GO TO 3.
- WRITING VEHICLE SPECIFICATION
Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Work Procedure .
WORK END