LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> Q70 3.7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Hybrid Control System) >> Basic Inspection >> Additional Service When Replacing HPCM >> Work Procedure

Work Procedure

WARNING: This page is about a different variant/trim than selected.
  1. PERFORM INITIALIZATION OF IVIS (NATS) SYSTEM AND REGISTRATION OF ALL IVIS (NATS) IGNITION KEY IDS 

    Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs.

    Refer to "HPCM: WORK PROCEDURE ".

    : GO TO 2.

  2. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING 

    Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING ".

    Refer to "WORK PROCEDURE ".

    : GO TO 3.

  3. PERFORM CLUTCH 1 POSITION LEARNING 

    Perform "CLUTCH 1 POSITION LEARNING ".

    Refer to "WORK PROCEDURE ".

    : END

scientia non olet · About LEMON Manuals