Removal and Installation: Installation

WARNING: This page is about a different car, the 2011 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal.

Surely clamp fuel hoses and insert hose to the length below.
Fuel filler hose: 35 mm (1.38 in)

The other hoses: 25 mm (0.98 in)
Be sure hose clamp is not placed on swelled area of fuel tube.
Tighten the clamp hand with the top mark (A) until the mark is on the bolt head flange.

Fig 1: Identifying Clamp Top Mark
Courtesy of NISSAN MOTOR CO., U.S.A.
To connect quick connector, refer to "QUICK CONNECTOR ".