Section 8 (Engine Cooling System (1GR-FE)): Fan: Installation
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL FAN
- Install the fan to the coupling with the 4 nuts.
Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
- Install the fan to the coupling with the 4 nuts.
- INSTALL FAN SHROUD (see INSTALLATION )
- INSTALL RADIATOR HOSE INLET
- INSTALL RADIATOR HOSE OUTLET
- ADD ENGINE COOLANT (see REPLACEMENT )
- INSPECT FOR COOLANT LEAK (see ON-VEHICLE INSPECTION )
- INSTALL V-BANK COVER (See INSTALLATION )
- INSTALL NO. 1 ENGINE UNDER COVER (See INSTALLATION