LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> M35 Base >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> DTC U1000 Can Communication Line >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode for "A/T" with CONSULT-II.
  3. Start engine and wait for at least 6 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
Fig 1: Consult-II SELECT SYSTEM Display Screen
G04083859Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals