Diagnostic Procedure

CHECK CAN COMMUNICATION CIRCUIT
With CONSULT-II
1. Turn ignition switch ON and start engine.
2. Select "SELF-DIAG RESULTS" mode for "A/T" with CONSULT-II.
Fig 1: CONSULT II Display - Self-Diag Results
Courtesy of NISSAN MOTOR CO., U.S.A.

Is any malfunction of the "CAN COMM CIRCUIT" indicated?

YES: Print out CONSULT-II screen, GO TO LAN SYSTEM . Refer to "PRECAUTIONS WHEN USING CONSULT-II ".

NO: INSPECTION END