LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2005 >> G35 x >> Repair and Diagnosis >> Transmission >> Automatic Transmission - Sedan >> Shift Control System >> Adjustment of A/T Position >> 2WD Models

2WD Models

  1. Loosen nut of pivot pin.
  2. Place PNP switch and selector lever in "P" position.
  3. While pressing lower lever toward rear of vehicle (in "P" position direction), tighten nut to specified torque. Refer to "CONTROL DEVICE COMPONENTS (2WD MODELS) ".
    Fig 1: Loosening Nut Of Pivot Pin
    G02349628Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals