LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 2004.5 - Automatic Transaxle - Sedan >> Shift Control System >> Adjustment of A/T Position >> 2WD Models

2WD Models

  1. Loosen nut of pivot pin.
  2. Place PNP switch and selector lever in "P" position.
  3. While pressing lower lever toward rear of vehicle (in "P" position direction), tighten nut to specified torque. Refer to "COMPONENTS (2WD MODELS) ".
    Fig 1: Identifying 2WD Models
    G03326060Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals