LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> FX35 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Engine Control System) >> DTC P1805 Brake Switch >> Component Inspection >> Stop Lamp Switch

Stop Lamp Switch

WARNING: This page is about a different car, the 2004 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect stop lamp switch harness connector. See Figure .
  2. Check continuity between stop lamp switch terminals 1 and 2 under the following conditions.
    Fig 1: Testing Stop Lamp Switch Continuity
    G00345437Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Stop Lamp Switch Continuity Specifications
    G00345436Courtesy of NISSAN MOTOR CO., U.S.A.
  3. If NG, adjust stop lamp switch installation, Refer to ON-VEHICLE SERVICE , and perform step 2 again.