Abs (Anti-Lock Brake System)
- Components
- Description
- Schematic Diagram
- System Function
- Circuit Diagram
- General Diagnostics And Test
- Troubleshooting
- ABS Does Not Operate
- ABS Does Not Operate Intermittently
- Communication With Hi-Scan (pro) Is Not Possible. (Communication With Any System Is Not Possible)
- Communication With Hi-Scan (pro) Is Not Possible.; (Communication With ABS Only Is Not Possible)
- When Ignition Key Is Turned ON (Engine OFF), The ABS Warning Lamp Does Not Light Up.
- Even After The Engine Is Started, The ABS Warning Lamp Remains ON
- Brake Warning Lamp Is Abnormal
- DTC C1101 (Over Voltage); C1102 (Low Voltage) Battery Voltage out of Range (Low or Over Voltage)
- DTC C1200 (FL); C1203 (FR); C1206 (RL); C1209 (RR) Wheel Speed Sensor Open or Short to Ground
- DTC C1201 (FL); C1204 (FR); C1207 (RL); C1210 (RR) Wheel Speed Sensor Signal Malfunction (Speed jump or damaged exciter)
- DTC C1202 (FL); C1205 (FR); C1208 (RL); C1211 (RR) Wheel Speed Sensor Signal Malfunction (Air-gap error or wrong excite)
- DTC C1604 ECU Hardware Failure; (ECU Internal or Solenoid Valve Failure)
- DTC C2112 Valve Relay Failure (Valve Relay or Fuse Failure)
- DTC C2402 Motor Relay or Motor Electrical Failure
- DTC C1503 TCS Switch Failure (only System with TCS)
- DTC C1605 CAN Hardware Failure (only System with TCS)
- DTC C1610 CAN Bus Off Failure (only System with TCS)
- DTC C1611 EMS Time-out Failure (only System with TCS)
- DTC C1612 TCM Time-out Failure (only System with TCS)
- DTC C1613 TCM Wrong-Matched Transmission Failure (only System with TCS)
- DTC C2227 Brake Disc Overheat (only System with TCS)
- Adjustment: Bleeding Brake System
- Anti-Lock Braking System Control Module
- Anti-Lock Braking System Wheel Speed Sensor