Fuel Tank: Installation
WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Position and support fuel tank, raising front of fuel tank first. Reconnect fuel tank sending unit and fuel pressure sensor harness connectors.
- Raise fuel tank and install fuel tank straps. Install fuel tank strap retaining bolts and tighten to specification. See TORQUE SPECIFICATIONS .
- To complete installation, reverse removal procedure. Lower vehicle. Add fuel to fuel tank. Turn ignition switch to ON position for 2 seconds. Turn ignition switch to OFF position for 10 seconds. Turn ignition switch to ON position. Check for fuel leaks. Repair as necessary.