Torque Specifications
WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Accelerator Pedal Position Sensor Retaining Bolts | 15 (20) | ||
| Battery Cable-To-Battery Bolt | 11 (15) | ||
| Camshaft Position Sensor Retaining Bolt | 18 (25) | ||
| Crankshaft Position Sensor Retaining Bolt | 18 (25) | ||
| Engine Coolant Temperature Sensor | 15 (20) | ||
| EVAP Canister Mounting Bolts | 18 (25) | ||
| Fuel Line Fittings | 18 (25) | ||
| Fuel Tank Strap Retaining Bolts | 30 (40) | ||
| Knock Sensors | 15 (20) | ||
| Oxygen Sensors | 31 (42) | ||
| Spark Plugs | (1) | ||
| Starter Mounting Bolts | 37 (50) | ||
| INCH Lbs. (N.m) | |||
| Air Inlet Tube Hose Clamp | 35 (4.0) | ||
| Crossover Pipe-To-Right Fuel Rail Retainer Screw | 34 (3.8) | ||
| Engine Sight Shield Bracket Bolt | 89 (10.0) | ||
| EVAP Canister Purge Solenoid Retaining Bolts/Nuts | 93 (10.5) | ||
| Fuel Fill & Vent Pipe Hose Clamps | 22 (2.5) | ||
| Fuel Filler Pipe Ground Strap Retaining Bolt | 80 (9.0) | ||
| Fuel Filter Bracket Retaining Bolt | 106 (12.0) | ||
| Fuel Rail Retaining Bolts | 89 (10.0) | ||
| Ignition Coil Retaining Bolts | 71 (8.0) | ||
| Intake Manifold Sight Shield Bracket/Retainer Bolts/Nuts | 44 (5.0) | ||
| Intake Manifold Sight Shield Fastener | 89 (10.0) | ||
| PCM Harness Connector Fasteners | 71 (8.0) | ||
| Positive Battery Cable-To-Solenoid Nut | 80 (9.0) | ||
| Throttle Body Mounting Nuts | 89 (10.0) | ||
|
|||