HandsFreeLink Control Unit Removal/Installation

NOTE: Tell the customer they need to write down all phone numbers as there is no way to transfer the information in the original HandsFreeLink control unit to a new HandsFreeLink control unit.

Remove the passenger's center console trim (see CENTER CONSOLE REMOVAL/INSTALLATION ).
With navigation: Disconnect the connector (A).

Fig 1: Connectors, Harness Clip, Stay And Bolts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors (B), and loosen the bolts (C). Detach the harness clip (D), then pull out the stay (E).
Remove the screws (A) and the HandsFreeLink control unit (B).

Fig 2: Identifying HandsFreeLink Control Unit And Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the HandsFreeLink control unit in the reverse order of removal.
After replacing the HandsFreeLink control unit, tell the customer:
- They need to pair their phones to the system.
- They need to set up their system preferences.